ADJ is introducing the Element Series, a new collection of battery powered, long distance wireless DMX (2,500ft/700M line of sight) par fixtures, specifically created for up-lighting. Using both quad color and hex color LEDs, as well as options with IP-rated weather-resistant construction, the Element Series is designed for lighting professionals and mobile entertainers.
The Element QA incorporates six five-Watt four-in-1 RGBA (Red, Green, Blue and Amber) LEDs can be used to create a palette of colors, including warm shades of orange that couldn’t be achieved using older RGB LED technology. With a beam angle of 14-degrees, the unit creates swathes of color for accentuating walls, pillars and other architectural elements.
The Element QAIP utilizes the same LED light-source as the Element QA but has an IP-rated weather-proof casing. Certified to the IP54 standard, which means that it is protected from dust and also splashes of water from all directions, this lighting tool allows wireless up-lighting to be used for outdoor events even in wet weather.
The Element HEX features four 10-Watt RGBAW+UV (Red, Green, Blue, Amber, White + UV) LEDs. The inclusion of a white element within the LEDs allows for true bright white illumination while the UV component means that electric shades of pink and purple can be created. With a slightly wider beam angle of 20-degrees, this fixture is designed for highlighting larger areas of wall with color washes.
The Element HEXIP offers the ultimate in wireless up-lighting. It combines the same 6-in-1 LEDs as the Element HEX, but fitted into an IP54-rated enclosure. This allows any hue or shade of color to be created indoors or out, with no power or signal cables.All four models are fitted with wireless DMX receivers that utilize ADJ’s WiFly EXR (extended range) technology and are capable of receiving a wireless control signal from a compatible ADJ WiFly EXR controller or transceiver from a distance of up to 2,500 feet (700M). In addition to DMX, the units can also be controlled wirelessly via infrared using either ADJ’s UC-IR remote or Airstream IR iPad/iPhone control system (both sold separately). They can also run in standalone mode, with a four-digit LED display on the back panel providing a menu-driven interface that allows access to preset color macros, automatic color change and fade patterns, as well as full color mixing.All fixtures in the range are fitted with a lithium ion battery designed to allow 11 hours of illumination (single color) between charges. The system also offers charging of 4.5 hours to return the battery to full capacity.
Power input and output sockets – in the form of IEC connections – are located on the base of the unit and can be used to connect together multiple fixtures for charging, or for mains-powered operation if Element Series up-lighters are required for more than 11 hours of continuous use. XLR input and output sockets are also included to allow the fixtures to be used as part of a traditional cabled DMX system should a WiFly controller or transceiver not be available.“Our new Element Series makes use of the latest technology to create up-lighting par fixtures that offer both impressive output and complete flexibly,” says ADJ USA’s National Sales Manager, Alfred Gonzales.
“Up-lighting is a fantastic way for lighting professionals and mobile entertainers to transform an event space, bringing it to life with richly-colored light, but setting up older cabled fixtures can be an extremely time-consuming – and often awkward – process. However, a whole room full of Element Series fixtures – with their integral rechargeable batteries and WiFLY EXR wireless DMX receivers – can be setup in a matter of minutes, making life easier for lighting users as well as allowing for much faster setup times. The IP54-rated models also extend the scope of potential for up-lighting, allowing it be safely and reliability deployed for temporary outdoor events.”
Designed for wall washing, the Element Series fixtures are all fitted with an integral carry handle and in-built feet, which mean they can be dropped in place and ready to go. They also feature a built-in kickstand to allow the beam to be angled inwards towards a wall if required. This can create a more intense wash and minimize light spill onto the ceiling above. Measuring 5.5” x 5.5” x 7.5” / 140 x 140 x 190.5mm (LxWxH), the Element Series fixtures feature a weight of 6.5 lbs. / 2.9kg. per unit, designed to be easy to store, transport and setup.
