ADJ is expanding the AV Series of LED video panels with a new model that offers the highest resolution in the range so far. Each of the flexible AV2 panels features a configuration of 3-in-1 RGB SMD2121 LEDs with a dense pixel pitch of 2.97mm (0.17”) allowing for vivid video display and a low minimum viewing distance.
With a brightness of 1000 NITS and black face LEDs for contrast, the AV2 features a pixel density of 168 x 168, which is equivalent to 112,896 per square meter. It offers a wide viewing angle of 160-degrees (horizontal) and 60-degrees (vertical – up and down) from a minimum viewing distance of 9.75ft. (2.97m). It is designed for use in situations where large screen displays are required, but can be viewed from close up as well as over a long distance.
With compact dimensions of 19.75” x 19.75” x 3” / 500 mm x 500 mm x 73 mm and a weight of 17.64 lbs. / 8 kg., the AV2 panels are designed to be convenient to rig, transport and store. They feature built-in plastic corner protectors that fold out from the back of the panel to keep the corners safe from knocks during transportation. The AV2 is also fitted with a retractable handle for installers and touring road crew.
Pairs of quick-locking connectors on the left and top sides of each panel match holes on the bottom and left side of neighboring panels, which allows for larger screens to be created by joining together multiple AV2s. The mounting holes on the right hand side also allow for up to 5-degrees of curve (either concave or convex). This means that curving LED video screens can be constructed to allow better viewing for audience members positioned to the side of a stage or to fit with the contours of a curved stage set or venue design.
Mounting points at each corner of the panels allow for permanent installation, while the separately-sold AV2RB rigging bar can be connected to the top row of panels on a screen to allow it to be hung from event rigging. The AV2RB has a maximum load capacity of 15 panels in a single vertical hang, for large video screens. In addition, the AV2RB can also be attached to the bottom of a panel in order to serve as a floor stand for a ground-stacked screen.
With a maximum power consumption of 115W per panel and an average consumption of 35W, the AV2 is designed to be economical to run. Each panel is fitted with a PowerCon input and output socket allowing the power supply for multiple panels to be linked together. Locking EtherCon input and output sockets are also provided for each panel, allowing the signal data to also daisy-chain across each panel that makes up a larger screen.
A Novastar A5s receiving card fitted into each AV2 handles the processing of the incoming video data. A choice of Novastar processors are then available, sold separately, which allow a standard video signal to be scaled across any configuration of AV2 panels and transmitted to the screens via Ethernet. “For screens consisting of up to 46 AV2 panels, the Novastar MCTRL-300 is a simple and affordable video processing option. For larger setups, the more advanced Novastar VX4S is capable of driving up to 92 AV2 panels. As with other models in the range, each AV2 panel is divided down into four mini panel modules, which allows for easy serviceability. This means that in the unlikely event that a pixel fault should occur only one of the four mini modules needs to be replaced and returned for repair, not the whole panel,” according to the release.
ADJ has introduced a brand-new road case specifically designed to store, transport and protect AV2 panels. The heavy-duty AV2FC road case is constructed from 9mm plywood, reinforced with steel ball corners, and fitted with four carry handles and four swivel castors. Inside, the case is divided up into eight sections, each lined with foam and designed specifically to accommodate an AV2 panel.
“The AV Series has been extremely popular right from the start,” comments ADJ USA’s National Sales Manager, Alfred Gonzales. “When we launched the AV6 a few years ago we disrupted the AV market with an affordable, reliable and easy-to-use system that made LED video panels accessible to production companies and for installation projects where they would have previously been way out of budget. Since then we’ve expanded the series to include a variety of LED panel options that all inherit those original traits of affordability, reliability and ease-of-use. The new AV2 model expands the range even further, offering the highest resolution yet from a compact and flexible LED panel that is equally suited to permanent installation as it is to touring and one-off event applications.”
The press release concludes, “Offering a tight pixel pitch, flexible design and keen price, the AV2 is ideal for a wide range of video applications, both fixed and temporary. It expands the AV Series so that it now offers a variety of pitch options ranging from 2.97mm up to 6mm, making it the one-stop LED video panel solution for nightclubs, music venues, churches and touring productions.”
To find out more about the ADJ AV2, visit: http://www.adj.com/av2
